Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Joliet Homeowners
A gate that doesn’t close right, drags on its track, or leaves a driveway open is a problem that gets worse with every season. Joliet weather works on gates year-round: freeze-and-thaw cycles in late winter heave posts, summer storms drop limbs on panels, and operators take a beating from constant use. We install gates for homeowners, landlords, and property managers across Joliet, and we do it as gate specialists, not as a fence crew that adds operators on the side. Our technicians have up to 13 years of experience, and electric gate work is our core trade. Installation is measured and scheduled around your site, not rushed. Call (855) 360-8227 for a free on-site estimate, and we’ll quote the job in writing before anything is ordered. Same-day repair is available when an existing gate fails.

Automatic Gate Installation
Automatic Gate Installation is the full job: a new gate built to fit your opening, paired with an operator that opens and closes it on a remote, keypad, or entry system. You need it when you’re replacing an old manual gate, adding controlled access to a driveway or side yard, or building new access where none existed. We handle residential and light commercial systems, work with LiftMaster and FAAC operators, and set up the safety edges, photo eyes, and loop detectors that keep the gate from closing on a person or vehicle. A basic single-swing automatic installation typically runs $3,200-$6,500 depending on the gate size, the operator, and the power run; a dual-swing driveway setup with access control usually lands $6,500-$12,000. Everything is quoted in writing first.
Choosing the Right Operator Duty Rating
Residential operators are rated for a certain number of cycles per day, and picking one that matches your actual traffic keeps it from wearing out early. A gate used a few times a day and one cycled dozens of times are not the same job. We size the operator to how you actually use the gate, not just to the gate’s weight.
Power and Control Wiring
An automatic gate needs a power source and low-voltage control wiring run out to the operator and any entry devices. We plan that route during the estimate so there are no surprises once the gate is set. Getting the wiring and the control layout right up front is what makes the automation reliable.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Installation Services
Gate Installation Services cover the whole range of new gate work we take on, from a straightforward single-panel swing gate to a multi-panel slide with access control. You need them when an old gate has rusted or sagged past saving, when you’re adding a gate to a property that never had one, or when you want the gate and its operator installed together by one gate-only company. We build, hang, and finish the install, then walk you through how the gate and operator work before we leave. Most residential installations fall between $2,800 and $9,000, and larger or fully automated projects run higher; the written estimate sets the final price. We service systems across gate repair in Joliet and the surrounding towns, so the same specialist who installs your gate is the one you call later.
New Gate, Existing Opening
When the posts and opening are already there, we measure the clear span and hang a gate built to that space. Existing posts are checked for plumb and solid footing before anything is mounted, because a gate hung on a leaning post will drag within a season. If a post needs work, we tell you before installation day.

Site Access and Grading
Driveway grade, apron width, and swing clearance decide whether a swing or a slide makes more sense for your property. We look at how water drains across the opening and how vehicles actually approach the gate. That keeps the finished gate clear of the ground and clear of the driveway.

Electric Gate Installation
Electric Gate Installation means wiring a gate to run on an operator, with the power supply, controls, and safety devices all installed and tested together. This is the work we do as a gate-only specialist, and it’s the reason property managers call us instead of a generalist: technicians who deal with control boards, loop detectors, and motor assemblies every day. You need it when the gate has to open for vehicles without someone getting out, when you want remote or keypad entry, or when you’re upgrading a manual gate to powered operation. A single electric swing gate typically runs $3,500-$7,000 installed; a double gate or a slide with loop detectors and access control runs $7,000-$13,000. Quote in writing first, every time.
Safety Devices and Compliance
An electric gate must stop or reverse when it meets an obstruction, so photo eyes, safety edges, and loop detectors are part of the job, not an add-on. We install and test each device before the gate is handed over. Never rely on an operator without working safety devices, because a closing gate carries real force.
Access Control and Entry
Keypads, remotes, intercoms, and card readers all tie into the operator’s control board, and we plan the entry points during the estimate. We keep the control wiring organized so future service is straightforward. We work with FAAC and LiftMaster controls and match the entry hardware to how the property is used.
Driveway Gate Installation
Driveway Gate Installation covers the gate that controls vehicle access to a home or lot, sized and hung to work with the width of your driveway and the vehicles that use it. You need it when you’re securing a long driveway, replacing a gate that’s too narrow or too flimsy, or building access control for a property that’s been open. We measure the clear opening, check the posts and footing depth, and set a gate that swings or slides without dragging. A single-panel driveway gate typically runs $2,800-$6,000 installed, and a double-drive or wide slide gate runs $5,500-$12,000 depending on span, material, and operator. We confirm the layout and the price before installation is scheduled.
Swing and Slide Options
A swing gate needs room to arc open; a slide gate needs run space along a fence line or wall. Which one fits comes down to your driveway layout and grade. We lay out both options at the estimate so you can see what works on your property.
Driveway Clearance and Grade
Gates that clear the ground on day one can catch it after a freeze or a heavy rain if the grade runs toward the opening. We check how water moves across the driveway and how the apron sits. That keeps the gate hanging clear through the seasons instead of dragging by spring.
Sliding Gate Installation
Sliding Gate Installation is the build for a gate that rolls along a track or cantilever system instead of swinging, which is the better fit when you don’t have room for a swing arc. You need it when a driveway is short, when the ground slopes, or when you want access control without a gate swinging into traffic or a walkway. We set the track or cantilever frame, hang and align the gate, and add the operator and safety devices if the gate is powered. A residential sliding gate typically runs $4,000-$9,000 installed, and a heavier commercial slide runs $9,000-$18,000 depending on width, material, and operator. We quote the whole build in writing before we start.
Cantilever vs. Tracked Slides
A cantilever gate rolls without a track in the driveway, which suits properties where a ground track would be in the way or collect debris. A tracked slide is simpler and works well on flat, solid ground. We recommend one based on your grade and how the gate is used.
Track Foundation and Leveling
A sliding gate depends on a level, solid base under the track or the cantilever posts. Posts go to proper footing depth so the gate stays true through freeze and thaw. Getting the base right is what keeps a slide rolling smoothly instead of binding.
Gate Opener Installation
Gate Opener Installation is fitting a new operator to an existing or new gate, whether you’re automating a manual gate for the first time or replacing a failed opener. You need it when the current operator has died, when you want remote and keypad entry, or when you’re adding a gate and the opener is part of the build. We work with equipment from LiftMaster, FAAC, BFT, and other major makes, and we match the operator’s duty rating and arm or slide setup to your gate. A new residential opener installed typically runs $1,200-$3,200 depending on the operator and the wiring, with access control and safety devices adding to that. We confirm the operator model and price in writing first.
Matching the Opener to the Gate
An operator is rated for a gate’s weight, width, and how often it cycles, so a unit that runs a small ornamental gate won’t hold up on a heavy driveway gate. We check the gate’s weight and swing before recommending a model. That keeps the opener from straining and failing early.

Replacing a Failed Operator
When an existing opener has failed, we test the gate and the controls before deciding whether the operator needs replacing or the fault is in the wiring or a safety device. Diagnosing that correctly saves you from paying for an operator you didn’t need. We fit the new unit and test every control before we leave.
Gate Fabrication
Gate Fabrication is building a gate to fit an opening that a stock gate won’t, whether that’s an unusual span, a custom look, or a heavy-duty panel for a property with real traffic. You need it when the opening is an odd size, when an off-the-shelf gate won’t carry the operator you want, or when the property calls for something specific in material and finish. We build to the measured opening, add reinforcement where the hinges and operator mount, and finish it to suit the site. Custom fabrication typically runs $2,500-$8,000 depending on size, material, and design, with automated builds running higher. The written estimate sets the price before any metal is cut.
Custom Sizing and Materials
The opening is measured before anything is built, so the gate fits the posts rather than the other way around. Material choice – steel, aluminum, or a mix – affects weight, how the gate ages, and what operator it needs. We walk through the options and the tradeoffs at the estimate.
Reinforcement for Operators
A gate that gets an operator needs extra bracing where the arm or the slide mechanism attaches, or it flexes and cracks over time. We build that reinforcement into the frame from the start. That’s the difference between a gate that lasts and one that needs constant adjustment.
Brands We Service
We work on a focused list of gate operators, which means we know where each one wears out. We service LiftMaster equipment and know its control boards and arm setups well enough to diagnose a fault without guessing. We service FAAC operators and are familiar with their control logic and safety-device wiring. We also work directly with BFT and Mighty Mule systems, from a simple residential opener to a heavier slide operator.
Because we deal with several major makes rather than a single brand, we can repair or update the equipment you already have instead of pushing a full replacement. If your operator has a control board, a detector, or a motor assembly that’s causing trouble, we work on it directly. Whether you have a LiftMaster, FAAC, BFT, Mighty Mule, or any other make, we can help. That includes Joliet properties with older operators where parts or setup need a careful second look.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate drags or binds when it moves. A gate that scrapes the ground or sticks partway through its travel usually points to a sagging hinge, a shifted post, or a track that’s out of level. Left alone, the drag strains the operator until it fails too.
- The operator won’t open or close reliably. A gate that stops partway, reverses for no reason, or ignores the remote often has a control or safety-device fault. Having a gate specialist trace the circuit is faster than swapping parts and hoping.
- The gate won’t stay closed or won’t latch. Access control that doesn’t hold is a real problem on a property gate. It’s often a sensor, a limit setting, or a mechanical alignment issue that a proper diagnosis can pin down.
- You see rust, cracks, or bent panels. Structural damage on a gate panel or post weakens the whole gate and puts stress on the operator. Catching it early usually means a repair instead of a full replacement.
- The gate is old enough that parts are hard to find. When an operator or a control board is past its service life, a targeted replacement is often the better path. We’ll tell you plainly whether repair makes sense or replacement does.
Our Process, Step by Step
- 1
Free on-site estimate. We come out, measure the opening, check the posts and grade, and talk through what you want the gate to do. You get a written price before anything is ordered.
- 2
Layout and planning. We confirm swing or slide, operator model, power route, and safety devices. For an electric gate, we plan the power run and control wiring so the install goes smoothly on the day.
- 3
Fabrication or supply. Custom gates are built to the measured opening; standard gates and operators are ordered to fit. Nothing gets cut or mounted until the plan and the price are settled.
- 4
Installation. We set posts and footings to proper depth, hang and align the gate, mount the operator, and wire the controls and safety devices. Each part is tested as it goes in.
- 5
Final test and walkthrough. We cycle the gate, test photo eyes, safety edges, and loop detectors, and show you how to use the controls. You leave knowing how the gate and its operator work.
How Much Does Gate Installation Cost in Joliet?
A typical automatic driveway gate installation in Joliet runs $3,500-$12,000 depending on the gate, the operator, and the access control you add. A simple single swing gate with a basic opener lands near the lower end; a dual-gate or wide slide with keypad, intercom, and loop detectors runs toward the top. A new opener on an existing gate is often $1,200-$3,200. Custom fabrication ranges $2,500-$8,000 on its own.
What moves the price: the gate’s width and material, the operator’s duty rating, whether the power has to be run a long distance, how much access control you want, and whether posts or grading need work. To avoid overpaying, get the whole project quoted in writing up front, confirm what’s included (safety devices, wiring, haul-away), and don’t assume a heavier gate is always better – the operator has to match it.
Our free estimate covers the on-site measure, the layout, and a written price. The estimate is free, and nothing is ordered or installed until you approve the written quote. The price we agree on before work starts is the price, with the written estimate setting the final figure. Call (855) 360-8227 to schedule your estimate.
Our Service Area Near Joliet
We install and service gates throughout Joliet and the surrounding towns, including Shorewood, Crest Hill, Lockport, Minooka, Channahon, New Lenox, and Manhattan. When a gate needs a look, we answer 24/7 and dispatch technicians Sunday through Friday, 7am to 7pm. For installation work, we schedule the on-site estimate and the install around your property. We also serve Olympia Fields and Peotone for homeowners and property managers who want a gate-only specialist.
Serving Joliet, IL – Our Local Coverage Area
We serve Joliet and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Joliet
Gate installation is building and hanging a new gate and, if it’s automated, fitting the operator, wiring, and safety devices that run it. It includes measuring the opening, setting posts, hanging and aligning the gate, and testing everything before we leave. We quote the whole job in writing, and the estimate is free.
A standard single gate with an operator usually takes about a day, while a custom or wider automated gate can take longer once it’s measured and scheduled. The exact timeline depends on the gate size, whether it’s custom, and the power route. We confirm the schedule at the estimate, and we don’t start until you’ve approved the written price.
Most residential gate installations in Joliet land between $2,800 and $12,000 depending on the gate, the operator, and the access control. A new opener on an existing gate is often $1,200-$3,200, and custom fabrication runs $2,500-$8,000 on its own. The written estimate sets the final price. Call (855) 360-8227 for an exact quote – estimates are free.
Yes. We service LiftMaster, FAAC, BFT, and Mighty Mule, among other major gate operator makes. We work directly on control boards, loop detectors, and motor assemblies so we can repair or update your existing equipment rather than default to a full replacement. If you’re not sure what you have, we can identify it on-site.
Same-day service is available for repair calls. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Installation work is measured and scheduled, so it’s planned rather than same-day. Call (855) 360-8227 and we’ll get you on the schedule.
Warranty terms depend on the gate and operator you choose, and we’ll go over exactly what’s covered when we quote the job. You’ll know what’s covered before anything is installed. The written estimate spells out the terms so there are no surprises.
Clear the driveway and the work area so we have room to set posts and bring in the gate and operator. Let us know about any buried lines, irrigation, or obstacles near the opening. We’ll confirm access and the power route during the free estimate, so the install day runs without delays.
Schedule Your Gate Installation Service in Joliet Today
Whether you’re replacing an old gate, adding access control to a driveway, or automating a manual gate, we handle the whole job as gate specialists. Call (855) 360-8227 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a written price before any work starts, and the same specialist stays with your gate from first installation to later repairs.
Written by the team at Gate Repair Joliet.