Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for Joliet Homeowners
A gate that won’t open leaves a driveway blocked, a yard exposed, and a property manager fielding calls from tenants who can’t get in. Whether it’s a driveway gate dragging on its track, an iron gate sagging at the hinge, or a commercial slide gate that quit after a storm, the fix starts with a specialist who diagnoses the actual cause instead of guessing. Our technicians have up to 13 years of experience working on gates specifically, which means we recognize the difference between a failing operator and a bent frame before we touch a wrench. Electric and automated repair is our core work, not a side job. We answer 24/7, and for repair calls we offer same-day service in Joliet with fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 360-8227 and we’ll get your gate moving again.

Driveway Gate Repair
Driveway Gate Repair covers the swing and slide gates that guard the main way onto a residential property, and it’s the service we handle most often in Joliet. You need it when a gate stops latching, opens halfway and stalls, grinds along its path, or won’t respond to a remote at all. We diagnose the operator, the hinges and rollers, the frame, and the wiring before quoting anything, so the fix targets the real fault rather than a symptom. Most driveway gate repairs in Joliet run roughly $150 to $600 for mechanical work, while operator and control board issues typically fall in the $200 to $900 range depending on parts. The written estimate sets the final price, and it’s agreed before any work starts.
Won’t Open or Close
A gate that ignores the remote or opens a few feet and stops usually points to a limit switch, a failing control board, or a safety sensor that’s tripped. We test the operator’s inputs directly instead of swapping parts blindly. If the gate moves freely by hand, the trouble is electrical; if it binds, the trouble is mechanical.
Dragging and Off Its Track
Sagging hinges and worn rollers are the usual reasons a swing or slide gate drags along the ground. Left alone, a dragging gate stresses the operator until the motor or gearbox fails too. We straighten alignment and replace the worn hardware so the gate travels clean and the operator stops working overtime.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Welding
Gate Welding restores the structural joints that hold a gate frame together, and it’s the right answer when a gate has cracked at a hinge, split at a weld seam, or been struck and bent out of square. If a gate wobbles, sags after years of swing weight, or shows a visible crack at a corner, the joint has failed and needs to be rewelded properly rather than patched with bolts. We assess the frame, cut out the failed weld, and rebuild the joint so the gate regains its rigidity. Typical gate welding repairs in Joliet run about $200 to $700 depending on how much of the frame needs rework and whether the gate has to come off its hinges. The written estimate sets the final price before any work begins.
Cracked and Broken Joints
Stress concentrates at hinge plates and corner welds, which is where cracks appear first. A small crack spreads quickly once the gate is used daily, so catching it early keeps the repair cheap. We rework the failed joint and check the surrounding frame for the same weakness.
Grid, Picket, and Frame Work
Bent pickets and broken grid sections are common on ornamental and driveway gates after impact. Rewelding the grid back to the frame restores both the look and the strength of the panel. The result should read as a repair, not a patch.
Commercial Gate Repair
Commercial Gate Repair handles the automated and heavy-duty gates that control access at apartment complexes, industrial lots, and business entrances around Joliet, where a gate stuck open is a security problem and a gate stuck closed stops traffic. You need it when an access gate fails, a loop detector won’t trigger, or a slide gate comes off its track under regular vehicle load. We work on control boards, loop detectors, motor assemblies, and the mechanical hardware behind them, which is exactly the work many general contractors decline or misdiagnose. Commercial gate repair in Joliet typically runs $250 to $1,200 depending on the operator, the hardware involved, and access. Because commercial gates are measured and scheduled, we quote the job from a written estimate, not over the phone, and the price is agreed before work starts.
Access Control and Loop Detectors
A gate that opens for some vehicles and not others usually has a detection problem, not a motor problem. We test the loop and the access inputs to isolate the fault. Getting this right the first time matters when vehicles are queueing.
Heavy-Duty Slide and Swing Systems
Commercial gates carry far more weight and cycle time than residential ones, and their rollers, tracks, and frames wear accordingly. We inspect the whole assembly so a fix on the operator isn’t undone by a bent track. The goal is a gate that survives daily traffic, not just today’s repair.
Iron Gate Repair
Iron Gate Repair keeps ornamental and security ironwork functioning and intact, and it’s the service to call when an iron gate sags at the hinges, corrodes at a weld, or has a latch that no longer lines up. Iron gates age well but they don’t age quietly: hinge pins wear, paint fails, and rust creeps into joints before you notice. We check the hinges, the frame, the latch, and the condition of the iron so the repair lasts through another decade of use. Iron gate repair in Joliet generally ranges from $180 to $650, depending on whether the gate needs hinge work, welding, or rust treatment. The written estimate sets the final price, and it’s settled before we start.
Sagging Hinges and Alignment
Heavy iron panels load their hinges hard, and a worn pin shows up as a gate that scrapes the ground at the latch side. Swapping the hardware and realigning the panel fixes the sag and takes the strain off the frame. A gate that latches easily is a gate under no extra stress.
Rust and Finish Repair
Rust at the base of an iron gate is where structural damage begins, so it’s worth treating early. We clean the affected area and address the finish so the rot doesn’t spread. The repair protects both the iron and the gate’s appearance.
Sliding Gate Repair
Sliding Gate Repair addresses the track-mounted gates that roll sideways instead of swinging, and those systems fail in their own particular ways. You need it when a slide gate jumps its track, rolls crooked, drags at one end, or stops moving even though the motor runs. We check the track, the rollers, the guide posts, and the operator together, since a worn roller and a worn track usually go bad at the same time. Sliding gate repair in Joliet typically costs $200 to $750 depending on how much of the running gear has to be replaced. The written estimate sets the final price, agreed before any work starts.
Off-Track and Derailment
A slide gate that has come off its track can be a crush hazard if it’s run before it’s reset, so it’s worth stopping the operator until it’s fixed. We reset the gate, inspect the rollers, and correct the track alignment. Running a derailed gate is how a small repair turns into a large one.
Roller and Track Wear
Rollers wear flat and tracks collect grit and rust where a gate runs daily. Replacing the rollers and cleaning the track restores smooth travel and takes load off the operator. If the operator sounds strained, the running gear is likely the cause.
Wrought Iron Gate Repair
Wrought Iron Gate Repair covers the decorative, often custom-made gates that give a property its character, and it treats them as both structure and finish. It’s the right call when a wrought iron gate develops a crack in its scrollwork, loses a picket, or rusts through at a decorative joint. We match the repair to the original work as closely as the iron allows, so the fix doesn’t stick out on a gate people see every day. Wrought iron gate repair in Joliet generally runs $200 to $700 depending on the damage and how much ornamental detail needs rebuilding. The written estimate sets the final price, before any work starts.
Decorative Scrollwork Repairs
Scrollwork and ornament take impact first on a wrought iron gate, and a bent scroll is often more cosmetic than structural. We straighten and rework the detail so it tracks the original design. The trick is repairing it without leaving a scar.
Rust at Joints and Bases
Water collects at the base of a wrought iron gate, which is where rust gets its start. If the joint is soft, it needs rebuilding before it fails under swing stress. Treating it early protects the rest of the gate.
Metal Gate Repair
Metal Gate Repair handles the steel and aluminum gates that make up a large share of residential and light commercial gates in Joliet, from simple driveway barriers to heavier security gates. It’s the service for a bent gate frame, a snapped hinge, a cracked weld on a steel panel, or an aluminum gate that’s rattling loose at its fasteners. Our gate-only focus means we diagnose the metal, the hardware, and the operator as one system rather than treating them as separate trades. Metal gate repair in Joliet typically costs $175 to $650 depending on the metal and the repair. The written estimate sets the final price, and it’s agreed before any work begins.

Bent Frames and Hinges
A bent metal frame throws off the whole gate, since a hinge that’s out of line binds every time the gate moves. We straighten the frame and reset the hinges so the gate sits square again. Square gates last longer and are easier on the operator.
Steel Versus Aluminum
Steel gates are heavier and hold a weld well; aluminum is lighter but needs different handling at the joint. Knowing which metal you’re working with changes how the repair is done. We match the technique to the material so the fix holds.
Wood Gate Repair
Wood Gate Repair restores timber gates that have loosened, warped, or weathered their way out of alignment, and those are some of the most common driveway and garden gates across Joliet’s older neighborhoods. It’s the service for a gate that sags because a hinge has torn out of soft wood, a stile that’s split, or a gate that no longer latches because the frame has moved with the seasons. We repair the structure and the hardware together so the gate swings true again. Wood gate repair in Joliet runs about $175 to $600 depending on the extent of the damage and the hardware involved. The written estimate sets the final price, agreed before work starts.
Sagging and Hinge Tear-Out
Wood gates sag when a hinge pulls loose, and the cause is usually soft or split wood around the screw holes. We repair the wood at the hinge point before remounting the hardware. Otherwise the hinge simply works loose again.
Weather and Warp
Freeze-thaw cycles and summer humidity move wood, and a gate built tight in one season can bind in another. A warped gate is often a matter of adjustment rather than replacement. We correct the swing and treat the cause where we can.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
We work on the gate operators that run most residential and commercial systems in Joliet, and that includes LiftMaster and Mighty Mule. LiftMaster automation is common on residential swing and slide gates, and we know how its control boards and limit settings fail with age. Mighty Mule operators are popular on lighter residential gates, and we’re familiar with their common sensor and battery issues.
We also service FAAC and BFT systems, which show up on heavier residential and commercial gates and need a different approach at the control and motor level. Our multi-brand experience means we can repair or update the equipment you already have instead of pushing a full replacement. Whether you have a LiftMaster, Mighty Mule, FAAC, BFT, or any other make, we can help. If you need the operator itself looked at, see our gate repair service for the full breakdown.
Signs You Need a Pro Right Now
- The gate stops partway and won’t finish its cycle. A stall like this often means a failing limit switch, a tripped safety sensor, or a motor under strain. Running it repeatedly can wear the operator further, so it’s worth calling before it quits entirely.
- The gate drags, scrapes, or sits crooked. Dragging means the running gear or hinges are worn and the operator is fighting the gate. That extra load is what pushes a small hardware fix toward a bigger motor repair.
- You see a crack at a hinge or corner weld. A cracked joint spreads fast on a gate that’s used daily. Catching it early keeps the repair in welding territory instead of frame replacement.
- The gate has come off its track. A derailed slide gate can be a crush hazard if the operator runs while it’s off the track. Stop using the gate and have it reset and inspected before it moves again.
- Lights, keypads, or remotes stop responding. Access control failures are often electrical, and electricity around a gate operator is not a DIY job. It needs proper diagnosis and safe handling by a trained technician.
Our Process, Step by Step
- 1
We take your call and get the details. Tell us the gate type, what it’s doing, and whether it’s automated. That gives us a head start on the likely cause and lets us send the right technician for your system.
- 2
We diagnose on site. We test the operator, the controls, and the mechanical parts separately so we can tell an electrical fault from a structural one. Multi-brand experience with LiftMaster, FAAC, BFT, and Mighty Mule speeds up this step.
- 3
We quote before we work. You get a written estimate with the parts and labor spelled out, and you approve it before any work starts. No surprise invoice at the end.
- 4
We repair and test the gate. Once the fix is made, we run the gate through full cycles, check its travel, and confirm the safety sensors and stops work before we call it done.
- 5
We recommend what’s next, if anything. If a part is near the end of its life, we tell you so you can plan for it. If the gate is simply due for a check, we’ll say that too rather than overselling.
How Much Does Gate Repair Cost in Joliet?
A typical gate repair in Joliet runs $150 to $900 depending on the gate type and the fault, with most mechanical repairs falling between $175 and $600 and operator or control board work higher, in the $200 to $900 range. A driveway gate with a worn roller or a hinge that needs realignment sits near the lower end. A commercial slide gate that needs the operator and the track looked at together lands nearer the top. Wood and iron repairs fall in the middle, driven by whether the frame needs welding or the finish needs attention.
Several things move the number. Gate size and weight make a difference, since a heavy commercial panel takes more handling than a light residential one. Operator brand and parts availability matter too, and so does whether the gate has to come off its hinges. Access decides a lot: a gate that’s easy to reach is quicker to work on than one boxed in by landscaping or a narrow driveway.
To avoid overpaying, get a written estimate that lists parts and labor separately, and ask whether the quote covers testing and adjustment after the repair. Cheap doesn’t mean good value if the fault comes back next month. Our free estimate covers diagnosis, the recommended fix, and the price before we start. To get an exact number for your gate in Joliet, call (855) 360-8227. For a full installation or a new gate build, see our gate repair coverage and related work.
Our Service Area Near Joliet
We work on gates throughout Joliet and the surrounding towns, including Shorewood, Crest Hill, Lockport, New Lenox, Manhattan, Minooka, and Channahon. We also cover gate repair in Olympia Fields, Peotone, and the wider area. Response times vary with distance and how busy the day is, but repair calls are booked with fast dispatch from 7am to 7pm, Sunday through Friday. Tell us where you are when you call and we’ll give you a realistic window. For new gate work, see Gate Repair Joliet.
Serving Joliet, IL – Our Local Coverage Area
We serve Joliet and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Repair in Joliet
Gate repair is the diagnosis and fixing of everything that makes a gate work: the frame, hinges, rollers, track, latch, and, on automated gates, the operator, controls, and safety sensors. It covers mechanical faults like a sagging hinge or a gate off its track, and electrical faults like a dead control board or a sensor that won’t trigger. A gate specialist handles both sides of that system, which is why a gate that won’t open gets the right fix instead of a guess. Call (855) 360-8227 for an exact quote; estimates are free.
Most mechanical gate repairs are done in a single visit of one to three hours, while operator and control board work can take a bit longer if parts are needed. Simple fixes like a hinge replacement or a track adjustment are often finished the same day you call. Complex commercial systems may need a follow-up once the right part arrives, and we’ll tell you that upfront in the estimate. Call (855) 360-8227 to book a visit.
Most gate repairs in Joliet fall between $150 and $900, with common mechanical fixes in the $175 to $600 range and operator or control board repairs higher. The price depends on the gate type, the fault, and the parts needed. You get a written estimate and approve it before any work starts, so the final invoice matches the quote. Call (855) 360-8227 for an exact quote; estimates are free.
Yes, we service LiftMaster and Mighty Mule systems, along with FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite. We work directly with control boards, loop detectors, and motor assemblies, so we can often repair the equipment you already have rather than replace it. Tell us the brand when you call and we’ll send a technician familiar with it. Call (855) 360-8227 to set up a visit.
Yes, same-day service is available for repair calls in Joliet. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (855) 360-8227 to get on the schedule.
We stand behind the work we do, and the written estimate spells out the terms that apply to your repair. Parts carry their own coverage depending on the manufacturer. Ask about the specifics when we quote the job, and you’ll know exactly what’s covered before work starts. Call (855) 360-8227 for details on your repair.
Clear the area around the gate so the technician can reach both sides and get to the operator safely. Make sure someone is there to give access, and have any remotes, keypads, or gate codes ready to test. If the gate is automated, note whether the motor runs but the gate doesn’t move, since that detail narrows the diagnosis quickly. Call (855) 360-8227 to confirm your appointment.
Schedule Your Gate Repair Service in Joliet Today
Don’t wait for a dragging gate to take the operator down with it. Call (855) 360-8227 to book gate repair in Joliet with a specialist who works on gates every day, not a generalist figuring it out on site. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and a free, no-obligation estimate before any work begins. Same-day service is available for repair calls.
Written by the team at Gate Repair Joliet.